2.4 GHz, 18 dBi, Grid Dish Model #ANT2DG18
Specifications
 |
Reflector Material |
Cast Magnesium Alloy |
| Mounting Hardware |
Stainless Steel |
| Gain |
18 dBi |
| Input Frequency |
2400 - 2500 MHz |
| -3 dB Beam Width |
14° |
| Cross Polarity Rejection |
>23 dB |
| Front-to-Back Ratio |
>23 dB |
| Impedance @ Output |
50 OHMS |
| Elevation Adjustment |
60° in 10° Increments |
| VSWR (Average) |
1.4:1 @ 2450 MHz |
| Overall Size |
16 x 20 x 15 inches
(40.64 x 50.80 x 38.10 cm) |
| Weight |
2.7 lbs.
(1.22 Kg) |
| Mounting |
1" - 2" O.D. Mast
(2.54 - 5.08 cm) |
| Wind Load |
MPH |
lb. |
| (Based on worst case air temp. -30°F.
Windload would be 18% less at +60°F.) |
40 |
6.3 |
| 60 |
14.2 |
| 80 |
25.2 |
| 100 |
39.4 |
| 120 |
56.6 |
FEATURES
- Lightest weight grid antenna with low wind resistance.
- Stamped aluminum 13 and die-cast 18/25 manufacturing processes provide unmatched
uniformity, resulting in consistently high performance from every antenna.
- Magnesium Alloy is comparable to anodized aluminum, but weighs 33% less.
- Antennas and mounting hardware are manufactured with nonferrous material such as
magnesium alloy, stainless steel and aluminum, which will not rust.
- No need for mechanical adapters - one size fits all!
- Antennas can be mounted in horizontal or vertical polarity.
- Easy installation.
- Antenna elevation adjustment up to 60°
Home
Products
Solutions
Specials
Tools
Newsletter
Company Info
|
|
Copyright © 2001 First Mile Wireless, Inc. All materials included in
this site are protected by
U.S. and international copyright laws. All rights reserved. For comments or questions about this site,
contact us.
|
|
