All Models Feature:
- Integral Lightning Protection
- 100% Weatherproof
- All-Metal Construction
- Mast-Mountable
- Durable UV Finish
- Two Diagnostic LEDs (TX/RX)
- Heavy Duty "N" connectors
- 1 Year Warranty
- Made in U.S.A.
| Each HyperAmp II
Kit Includes:
- HyperAmp™ Remote Amplifier
- DC Power Injector/Lightning Protector
- DC Power Supply (110/220V@50/60Hz)
- Stainless Steel Hardware
- Installation Manual
HyperAmp’s Power Injector provides DC power through
the antenna cable. In addition, it features lightning protection and two
additional diagnostic LEDs which can be used to verify proper amplifier
operation remotely .
|
HyperAmp® AGC Amplifiers offer the ultimate in performance, versatility
and ease of installation. Hyperlink's AGC (automatic gain control) circuit
automatically adjusts the amplifier's gain to provide a constant output
power regardless of cable length or type. This weather-proof
mast-mountable unit features excellent linearity and a low 3.5 dB noise
figure which makes it the highest performance wireless LAN amplifier
available today.
The HyperAmp® AGC improves range and reliability by placing 100, 250, or 500
mW of transmit power as well as 10 dB of low-noise receive gain directly
at the antenna where it is most effective. This receive gain completely
compensates for cable losses and actually increases the receive
sensitivity of most wireless LAN radios. The unit can be configured to
deliver a constant 100 mW of transmit power with as little as 5 mW of
input power. This feature permits cable runs of several hundred feet with
no degradation in operating range.
HyperAmp® AGC amplifiers are compatible with Direct Sequence and Frequency
Hopping Spread Spectrum including 16QAM and 11 Mbit/sec IEEE 802.11b
devices.