| GENERAL |
Weight: 150 lbs. assembled
190 Lbs. Shipping weight |
Doors: two - securedby three point locking system
Locks via customer supplied padlocks
Sealed with 13/16" aluminum filled gaskets |
Material: .125 ALUMIFLEX
Finish: Flat aluminum
RF properties: Non-ferrous |
Vents: Twelve bottom louvers per door
Six top louvers - In top cover-under ALUMSHIELD
One removable filter panel per door
Six fixed filter pads in top cover |
| Handles: Stainless steel |
| Exterior Screws: Stainless with NEMA washers & nylon locking nuts |
| RACKING SPECIFICATIONS |
Rails: Two standard (For additional rails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by three R-STRUTS
.125 Material (ALUMIFLEX) |
| Spacing: 19" EIA STANDARD |
| Positioning: All rails fully adjustable from front to rear |
| Useable Height: 50 inches |
Useable Depth: Maximum: 30 1/2" Minimum: 28 3/4" (See below)
|
*Section Starting
& Ending Points |
|
Vertical Height
Per Section |
Effective Depth For each section |
Top
|
46.75" - 50.00"
46.57" - 46.75"
31.00" - 46.57" |
=
=
= |
3.25"
.18"
15.57" |
...30 1/2"
...29 1/2"
...30 1/2" |
| Center |
19.00" - 31.00"
3.43" - 19.00"
3.25" - 3.43" |
=
=
= |
12.00"
15.57"
.18" |
...28 3/4"
...30 1/2"
...29 1/2" |
| Bottom |
0.00" - 3.25" |
= |
3.25" |
...30 1/2" |
*Section measurements start from the bottom of the cabinet (0.00")
& runs vertically upward towards the top of the cabinet (50.00"): |
|
| DOOR OPENING CLEARANCE |
| Width : 19 1/2 inches |
| Height : 45 13/16 inches |
| EXTERIOR CABINET DIMENSIONS |
Main Body::
Width: 25 1/2 inches
Height: 50 1/4 inches
Depth: 34 1/4 inches |
Alumshield:
Width 28 1/16 inches
Hang down height: 1 3/4 inches
Depth: 36 11/16 inches |
| Handles: Protrude 1 7/8 inches |
Total Space Occupied:
Width: 28 1/16 inches
Height: 50 1/2 inches
Depth: 38 inches |
| INSIDE CLEARANCE - LESS RAILS |
| Width: 23 5/8 inches |
| Height: 50 inches |
| Depth: See racking spec's - useable depth chart above |