| GENERAL |
Weight: 209 lbs. assembled
249 lbs. Shipping weight |
Doors: two - secured by three point locking system
Locks via customer supplied padlocks
sealed with 13/16" aluminum filled gaskets |
Material: .125 ALUMIFLEX
Finish: Flat aluminum
RF properties: Nonferrous |
Vents: Twelve bottom louvers per door
Six top louvers - In top cover-under ALUMSHIELD
One removable filter panel per door
Six fixed filter pads in top cover |
| Handles: Stainless steel |
| Exterior Screws: Stainless with NEMA washers & nylon locking nuts |
| RACKING SPECIFICATIONS |
Rails: Four standard (For additional rails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by three R-STRUTS
.125 Material (ALUMIFLEX) |
| Spacing: 19" EIA STANDARD |
| Positioning: All rails fully adjustable from front to rear |
| Useable Height: 62 inches |
Useable Depth: Maximum: 38 1/2" Minimum 36 3/4"
|
*Section Starting
& Ending Points |
|
Vertical Height
Per Section |
Effective Depth
For each section |
Top
|
58.75" - 62.00"
58.57" - 58.75"
37.00" - 58.57" |
=
=
= |
3.25"
.18"
21.57" |
...38 1/2"
...37 1/2"
...38 1/2" |
| Center |
25.00" - 37.00"
3.43" - 25.00"
3.25" - 3.43" |
=
=
= |
12.00"
21.57"
.18" |
...36 3/4"
...38 1/2"
...37 1/2" |
| Bottom |
0.00" - 3.25" |
= |
3.25" |
...38 1/2" |
*Section measurements start from the bottom of the cabinet (0.00")
& runs vertically upward towards the top of the cabinet (62.00"): |
|
| DOOR OPENING CLEARANCE |
| Width : 19 1/2 inches |
| Height : 57 13/16 inches |
| EXTERIOR CABINET DIMENSIONS |
Main Body::
Width: 25 1/2 inches
Height: 62 1/4 inches
Depth: 42 1/4 inches |
ALUMSHIELD:
Width 28 1/16 inches
Hang down height: 1 3/4 inches
Depth: 44 11/16 inches |
| Handles: Protrude 1 7/8 inches |
Total Space Occupied:
Width: 28 1/16 inches
Height: 62 1/2 inches
Depth: 46 inches |
| INSIDE CLEARANCE - LESS RAILS |
| Width: 23 5/8 inches |
| Height: 62 inches |
| Depth: See racking Spec's - useable depth chart above |
