Telescoping Masts
|
- Available in 20 ft., 30 ft., 40 ft., and 50 ft. heights
- Made from heavy gauge galvanized steel
- Each 10 ft. section fits inside the section below it for easy handling
- Can be used with our Uni-roof mount, or Ground Mount
- Easy installation -- simply attach guy wires, and insert locking
pin while pushing up each 10 ft. section. (Installation will require 4 to
5 people)
|
The telescoping masts are a guy wired push-up mast system. Each 10 foot
section pushes up from in-side the section below it. You attach guy wires
to each 10 foot section as you push up the section and insert the lock
pin. Each 10 foot section has a built-in guy wire ring which connects 3
to 4 guys wires. The guy wires must be anchored at equal interval around
the mast, and must be at least 2/3 of the height of the mast away from the
base of the mast. Once the mast is fully pushed up, and the guy wires are
in place the guy rings spin freely allowing the entire mast be turned
at the base for antenna alignment.
Ordering information:
- 20 ft. Tele-mast Part #TELE20 $169.00
- 30 ft. Tele-mast Part #TELE30 $179.00
- 40 ft. Tele-mast Part #TELE40 $189.00
- 50 ft. Tele-mast Part #TELE50 $199.00
- * All telemasts must be shipped via truck freight, which has a $250.00
minimum freight fee.
- 1000 ft. spool of guy wire Part #GUY1000 $65.00
- Universal Roof mount Part #UNIMNT $19.00
- Ground mount Part #GNDMNT $39.00
Home
Products
Solutions
Specials
Tools
Newsletter
Company Info
|
|
Copyright © 2001 First Mile Wireless, Inc. All materials included in
this site are protected by
U.S. and international copyright laws. All rights reserved. For comments or questions about this site,
contact us.
|
|
